About Our Carmel Metal Roof Coating Work
Restoring Commercial Metal Roofs One Repaired Detail at a Time
Read about our Carmel metal roof coating work: inspection first, repairs before primer, measured coats, and records you keep.
- Metal Panel Roofs
- Low-Slope Roofs
- Foam Roofs
- Shingle Roofs
What to Know About Our Carmel Metal Roof Coating Work
Here is what to expect, told plainly, about our Carmel metal roof coating work from the first roof walk to the final records.
Repairs First, Coating Second
A coating covers a roof; it does not fix one. So every job begins with the details that leak: screws, laps, curbs, skylights, and gutters. Those get repaired and checked before any primer is opened.
Coats go on to a measured thickness, and you receive the readings with photos. If a roof is past coating, we say so and explain why.
- Inspection photos with every scope
- Thickness measured section by section
- Straight answers when replacement fits better
Want a Second Look at Your Roof?
If another proposal left you unsure, send it over with a few photos. We will walk the roof and tell you what we would do.
What the Roof Inspection Covers
Every Carmel inspection walks through the same list before a scope is written.
- Screw heads, washers, and stripped or widened holes
- Side laps, end laps, and ridge cap seams
- Rust at cut edges, laps, gutters, and vents
- Skylight lenses and curb flashing
- Rooftop unit and exhaust fan curbs
- Gutters, downspouts, and eave closures
- Low spots and water lines after rain
- Core samples where insulation could be wet
Work We Turn Down on a Metal Roof
Coating is the raised column. The other two show what we repair first and what we will not coat.
What We Coat
- Rust
- Surface rust, brushed and primed
- Insulation
- Dry, confirmed by cores
- Panels
- Attached and holding screws
- Ponding
- Covered with a system made for it
- Records
- Thickness and photos handed over
What We Repair First
- Rust
- Rust holes in single sheets
- Insulation
- Wet areas cut out and replaced
- Panels
- Loose sheets refastened
- Ponding
- Drains cleared and slope fixed
- Records
- Repairs listed in the scope
What We Will Not Coat
- Rust
- Rust-through across the field
- Insulation
- Soaked insulation left in place
- Panels
- Crushed or missing panels
- Ponding
- Sagging decks that hold water
- Records
- Work without a written scope
Questions About Our Carmel Metal Roof Coating Work?
Call or send the roof size and a few photos. We will walk the roof and explain what we would do.